Sales
Body choice, loading access and finished vehicle weights belong in the same conversation. The options below are starting points for an enquiry, not guaranteed fitment.


A reliable starting price for this variant is not available. Request a quotation from PTM.
BDM / GVW 34,000 kg

Photo on request
Family reference illustration; AMT pictured. Power and equipment differ by variant.

Explore the Isuzu GIGA EW5-410 MT prime mover for your business in Malaysia. PTM in Selangor can help with configurations, quotations and the right aftersales support for your vehicle.
| Specification | EW5 410 6X4T |
|---|---|
| MODEL CODE | EW5 410 6X4T |
| Drive Configuration | 6×4 |
| Specification | EW5 410 6X4T |
|---|---|
| Model | GH11 |
| Type | 6-Cylinder In-line Turbocharge & Intercooler |
| Displacement(cc) | 10,837 |
| Bore and StrokeØ (mm) | 123 x 152 |
| PowerkW(HP) @ rpm | 308 (410) @ 1,800 |
| TorqueNm @ rpm | 1,990 @ 950 – 1,400 |
| Emission Regulation | Euro 5 |
| Emission After Treatment | Selective Catalytic Reduction (SCR) |
| Fuel System | Electronic Management System (EMS) |
| Specification | EW5 410 6X4T |
|---|---|
| Model | STO2012 |
| Type | Overdrive 12-Speed MT |
| Gear Ratio1st | 12.1 |
| Gear Ratio2nd | 9.41 |
| Gear Ratio3rd | 7.31 |
| Gear Ratio4th | 5.71 |
| Gear Ratio5th | 4.46 |
| Gear Ratio6th | 3.48 |
| Gear Ratio7th | 2.71 |
| Gear Ratio8th | 2.11 |
| Gear Ratio9th | 1.64 |
| Gear Ratio10th | 1.28 |
| Gear Ratio11th | 1.00 |
| Gear Ratio12th | 0.78 |
| Gear RatioReverse 1 | 11.56 |
| Gear RatioReverse 2 | 2.59 |
| Final Gear Ratio | 5.14 |
| Specification | EW5 410 6X4T |
|---|---|
| Gross Vehicle Weight(kg) | 34,000 |
| Gross Combination Weight(kg) | 60,000 |
| Curb Weight(kg) | 9,405 |
| Front(kg) | 4,865 |
| Rear(kg) | 4,540 |
| Fuel Tank Capacity(ℓ) | 405 |
| Urea Tank Capacity(ℓ) | 50 |
| Specification | EW5 410 6X4T |
|---|---|
| FrontType | Reverse Elliot “I” beam type |
| Front Axle Capacity(kg) | 8,000 |
| RearType | Full floating, Pressed steel banjo housing type |
| Rear Axle Capacity(kg) | 26,000 |
| Specification | EW5 410 6X4T |
|---|---|
| Front | Parabolic Leaf Spring with Stabilizer |
| Rear | Multi Leaf Spring |
| Specification | EW5 410 6X4T |
|---|---|
| Tyres | 295/80R22.5 |
| Wheel | 22.5 X 9 (ISO 10 Studs) |
| Specification | EW5 410 6X4T |
|---|---|
| ServiceType | Full Air |
| Auxiliary | Multi Stage : Exhaust + Compression Release Engine Brake |
| Specification | EW5 410 6X4T |
|---|---|
| Battery | 150Ah, 12V x 2 |
| Alternator | 24V-80A |
| Specification | EW5 410 6X4T |
|---|---|
| Supplemental Restraint System (SRS) with Pre-tensioner Seatbelt | Driver Only |
| Mechanical Battery Cut Off Switch | Equipped |
| Anti-Lock Braking System (ABS) | Equipped |
| Specification | EW5 410 6X4T |
|---|---|
| Overall LengthOAL (mm) | 7,055 |
| Overall WidthOAW (mm) | 2,480 |
| Overall HeightOAH (mm) | 3,209 |
| WheelbaseWB (mm) | 3,400 + 1,370 |
| Front OverhangFOH (mm) | 1,480 |
| Rear OverhangROH (mm) | 805 |
| Front ThreadAW (mm) | 2,015 |
| Rear ThreadCW (mm) | 1,836 |
| Ground ClearanceGC (mm) | 236 |
GVW and axle design capacities are not cargo payload. Chassis kerb weight excludes the completed body; wheelbase is not cargo-body length.
Illustrations show body styles, not the supplied vehicle.
These specifications follow the exact model-code column on Isuzu Malaysia's page. GVW and GCW are separate ratings, neither is payload, and published kerb/axle weights are not finished-vehicle BTM. The table lists EBS and EVSC for the AMT variants only; a dash is retained where the manufacturer does not list equipment. The EW5 wheelbase uses a plus sign for its tandem layout, not alternative wheelbases. The family illustration shows an AMT and does not establish the equipment or power of the quoted variant. Confirm coupling, trailer compatibility, registered weights, availability and current warranty/service terms with PTM.
Explore an instalment estimate with your own quotation and lender’s rate.
No quotation yet? WhatsApp PTM

Discuss the vehicle, body and support requirements with PTM. The team can confirm which centre and services are appropriate for your vehicle.
Body choice, loading access and finished vehicle weights belong in the same conversation. The options below are starting points for an enquiry, not guaranteed fitment.
Discuss routine servicing, diagnostics and the centre suitable for your vehicle.
Confirm parts availability against the model and chassis details.
Ask about panel repairs and repainting at Selayang / Batu Caves.
Working alongside Malaysian businesses since 1990.






Model details, body choices and the next steps with PTM.
WhatsApp PTMGH11 (10,837 cc); Euro 5. See the chassis columns in the full specifications for each variant.
STO2012, Overdrive 12-Speed MT. See the chassis columns in the full specifications for each variant.
Isuzu GIGA EW5-410 MT is a prime mover for a compatible trailer. Cargo belongs on the trailer; rigid box, tipper and tanker bodies are not interchangeable body choices for this tractor. Trailer specification, coupling and axle loads must be assessed together.
3,400 + 1,370 mm. See the chassis columns in the full specifications for each variant.
34,000 kg is the vehicle GVW. GVW is not payload. Actual cargo allowance depends on the completed vehicle’s registered BDM/BTM, body, equipment, occupants and axle limits.
Check the proposed trailer’s overall dimensions, turning and coupling clearance, loading height and axle distribution. The tractor wheelbase does not give trailer deck length or container capacity. A trailer drawing and loading plan are needed for the route assessment.
Specify Isuzu GIGA EW5-410 MT, quantity, tractor code, trailer type and drawing, combination weight requirement, coupling details and routes. Request separate included/excluded items for the vehicle, trailer and coupling, registration, insurance, road tax and other on-the-road charges. No fixed package, stock status or delivery date is established by these reference specifications.
Contact the Selayang / Batu Caves or Kota Damansara service team for Isuzu GIGA EW5-410 MT enquiries. Puncak Alam is also an Isuzu 3S service option. Body and paint enquiries go to Selayang. Send the model, chassis number, transmission and work required to the branch’s own service WhatsApp. Warranty repairs and specialist work need a separate scope and eligibility check.
Isuzu servicing: all three centres. Fuso servicing: Selayang / Batu Caves or Kota Damansara. Body & paint: Selayang only.
Tell us about your business and the configuration you need. Review your enquiry before sending it to PTM.
Mon–Sat, 08:30–17:30. Closed Sundays & public holidays.